# Print plant — camera IDs

Status: DESIGN CANDIDATE — working language for discussion  
Map authority: **site-plan-cursor-v1b** only (V1/V2 destroyed)

Format: **CAM-##** · STAND (feet) · AIM (look) · FOV note

Zone compass on V1b: north = top of plan. Z1 press line runs east–west along the **north** wall of Z1; L5 apron is the **south** half of Z1; Z2 enters Z1 from the **west**.

| ID | Plate | STAND | AIM | Notes |
| --- | --- | --- | --- | --- |
| **CAM-00** | 00 establishing | Z1 / L5 — south apron, mid-bay, west of center | North toward L1 press line (flank / L2 in view) | Parent establishing; apron in FG, press in MG |
| **CAM-01** | 01 reverse | Z1 — east end of press line, near L4 railing | West along L1 back toward Z2 doorway | Opposite travel of CAM-00 along the line |
| **CAM-02** | 02 day | Member-locked STAND 61.4%, 44.5% (map %) | North toward L1 press (0°) · Aim layer toggle | Day twin; Member: location OK, prior 195° AIM rejected |
| **CAM-03** | 03 corridor | Z2 — mid corridor, south of Z4 door axis | East toward Z1 press doorway (orange/green bleed) | Entry path; no second nerve in corridor |
| **CAM-04** | 04 L2 flank | Z1 — tight to L1 machine flank at L2 | Into L2 flush grid (slight along-machine) | Detail lock; symbols-only green grid |

## 00 vs 01 (this task)

- **CAM-00** = feet on empty apron, looking **at** the press.
- **CAM-01** = feet beside/near the press east end, looking **back along** the press.

If a regen “feels like the same angle,” check STAND first, then AIM.